Handle the Curves: Forcing a jig saw into the cut becomes problematic when making curved cuts. If you hold the saw with one hand only and push it around the curve, you end up pushing the saw sideways. The first remedy for this is to slow your feed rate when making curved cuts. The second is to hold the saw with two hands. With a little practice, you’ll be cutting curves that are dead-on every time.

Handle the Curves: Forcing a jig saw into the cut becomes problematic when making curved cuts.

Jig Saw Secrets | Woodsmith Tips

Woodworking also requires proper safety gear which includes eye and hearing protection and gloves. Proper shop ventilation and vacuum system, coupled with a respirator mask are also recommended when.

Jig for Routing Dadoes

10 Dirt-Simple Woodworking Jigs You Need Woodworking jigs ensure that cuts are straight, holes are plumb and parts are square—among many other things. And jigs are worth the time it takes to make them because youll use them over and over again for years.

Makeshift Countersinking Tip

30 Handy Hints for the Workshop

From tool hacks to genius storage ideas, these handy hints will help you save money, complete projects more efficiently, and have more fun in your workshop.

If youre trying to drill perfectly perpendicular holes through a piece of wood and finding yourself continually frustrated, try one of these quick hacks.

3 Tips for Drilling Super-Straight Holes

Kreg Jigs: Pocket Hole Joinery for Everyone - In 1986, Craig Sommerfeld was in the process of building his own home and wanted a way to attach the face frames to his kitchen cabinet carcasses without nailing through the front of them. Being a tool and die maker by trade and a DIYer at heart, he designed and built his own single-hole pocket hole jig. This first “Craig’s Jig” was made from steel and aluminum, and it worked so well that his friends and coworkers encouraged him to build more…

17 US Inventions: from DIYers, for DIYers

Kreg Jigs: Pocket Hole Joinery for Everyone - In Craig Sommerfeld was in…

Tips and Tricks for Using a Jig Saw: Cut a Notch along an Edge. Sometimes, you may need to cut a notch along the edge of a workpiece rather than at the corner. Start by making straight cuts to create the ends of the notch (sometimes called shoulders). Next, make a sweeping cut from the edge toward one corner of the notch. Finally, cut the remaining waste out with a straight cut along the back toward the other corner.

Tips and Tricks for Using a Jig Saw: Cut a Notch along an Edge. Sometimes, you may need to cut a notch along the edge of a workpiece rather than at the corner.

how to use a kreg jig

How to Setup and Use a Kreg Jig for DIY Projects

Pin this to your DIY board! Quick Start Guide - Kreg Jig: What does it do? How to set it up? How to make pocket holes? All those questions answered here!

This tutorial describes how to safely and easily use a jigsaw or sabre saw.

The Safe and Easy Way to Use a Jigsaw

The Jigsaw is the first power cutting tool you should have in your toolkit. This tutorial describes how to safely and easily use a jigsaw or sabre saw.

Pinterest
Search